|
The 2-5 ton Rheem 13 SEER RSNL & 14 SEER RSPL, Package Air Conditioning units feature earth-friendly R-410A refrigerant. This platform provides you with a full line of capacities that are each AHRI-certified. The design is certified by CSA International.
Additional Benefits
Comfort Alert™ Diagnostics
The Comfort Alert™ diagnostics module is a breakthrough innovation for troubleshooting air conditioning system failures. The module is installed in the control box near the compressor contactor. By monitoring and analyzing data from the Scroll® compressor and the thermostat demand, the module can accurately detect the cause of electrical and system related failures without any sensors. A flashing LED indicator communicates the ALERT code and guides the service technician more quickly and accurately to the root cause of a problem.
NOTE: Single phase module does not provide safety protection! The Comfort Alert module is a monitoring device and cannot control or shut down the compressor unless used with a White Rodgers IF95-CA397 Thermostat.
NOTE: Three phase module provides compressor protection and will shut down the compressor when compressor damaging conditions are detected.
The Scroll® Compressor
All of our residential/commercial package units, regardless of efficiency level, feature the Scroll Compressor. These scroll compressors use a more advanced technology than traditional reciprocating compressors. They have fewer moving parts, and they are quieter, more efficient, and longer lasting. The 5-Ton RSPL model features Scroll UltraTech™ 2-Stage compressors with Comfort Alert™ diagnostics (see below), high/low pressure switches, and hard start kits.
Durable Cabinet with Louvered Condenser Compartment
Our cabinets have a powder painted finish that protects them from the harshest weather extremes. And our louvered condenser compartment is the best in the industry for protecting the condenser coil against yard hazards and weather extremes. There is a One-piece top with a drip lip to help keep water off of the unit sides. Supply and return air openings feature a one-inch tall flange to prevent water migration into the ductwork. Access panels have “weep holes” and channels to further help manage water run-off. Side and down discharge options available on all models. Easily accessible blower section complete with slide-out blower. Refrigerant connections are conveniently located for easy service diagnostics.
Grille/Fan Motor Mount
Our mount helps protect the fan motor from the elements for longer life. Its design dependability helps reduce vibration and noise.
Easily Accessible Control Box
Operational controls are “up front” for quick installation and easy service diagnostics.
Matched Blower/Evaporator Coil Unit
The blower is responsible for the flow of air into your duct work. It has been designed to match the MultiFlex® evaporator coil and other system components for maximum efficiency and quiet operation. In addition, the coil features rifled copper tubing and enhanced fins for improved efficiency.
Service Fittings
Exterior service fittings enable a serviceman to quickly determine unit operating conditions.
Supplemental Electric Heating Strips
Supplemental electric heat strips up to 15 kW are available (field or factory installed) for periods of extreme cold temperatures. Single point wiring simplifies installation.
Other Benefits
All units feature an internal trap on the condensate line eliminating the need for installing an on-site external trap.
- Thermal expansion valves are standard on all models for superior superheat control, reliability, and energy efficiency at all operating conditions.
- Filter drier standard on all models (not shown).
- Rugged base rails are included for improved installation and handling.
|