Product Details
MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump - 12000 BTU
The Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump - 12000 BTU is the deal solution for multiple applications, including residential, commercial and industrial. This Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump System will provide you with 12000 BTU of heating and cooling capacity.
This efficient and effective Mitsubishi Heat Pump System, featuring high reliability and rugged construction, provides an excellent choice where personal comfort and equipment cooling meet. Thanks to Mitsubishi Electric's 30 Years of Experience, proven INVERTER-driven compressors and electronic linear expansion valves, combined with advanced control and sensor technology, provide the right performance to meet critical loads in high reliability applications. This synergy of smart design and cutting-edge environmental technology delivered by the Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump System results in true eco-comfort for any space.
High sensible heat factors averaging over 75% of system-rated capacity can handle heat generated by computers, power supplies, and other electrical and mechanical devices. Full-capacity cooling output down to zero degrees outdoor ambient (with optional wind baffle installed) provides excellent heat transfer in indoor equipment rooms and critical service centers transferring heat gains outside.
Quick and easy installation is a significant consideration in new construction and even more important in renovation applications. The Mitsubishi heat Pump System installation procedures ensure minimal interruption of operations and activities in critical service applications. Mitsubishi Electric indoor units are easy to install practically anywhere:
- High on the wall to blend into a room without taking up window space.
- In the ceiling or below the floor and totally out of sight.
- Low on the wall at floor level to be unobtrusive within the space.
Learn why Mitsubishi Mini-Split Heat Pump Systems are Flexible and Quiet.
Mini splits offer flexibility because they can be suspended from a ceiling, mounted flush behind a drop ceiling, hung on a wall or floor-standing. Mitsubishi Heat Pump Systems operate at low sound levels with indoor units producing decibels barely at a whisper level. Compare Mitubishi System sound levels to other common sounds:
- Police siren - 118 decibels
- Circular saw - 107 decibels
- Vacuum cleaner - 74 decibels
- Whisper-tone voice - 35 decibels
- Library reading room - 33 decibels
- Mitsubishi Heat Pump Indoor Units - 19-34 decibels (at low speeds)
Mitsubishi Inverter Technology.
The MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump System uses Mitsubishi Electric's sophisticated electronic control systems, which detect any changes in room or zone temperature and, like a car's cruise control, automatically adjust the speed of the integrated INVERTER driven compressor in the outdoor unit and the electronic linear expansion valve (LEV) position for precise capacity control. This feature is unlike conventional units, which only start and stop the constant speed compressor repetitively. Special components within the compressor such as high density windings in the motor increase the magnetic flux and artificial magnets in the rotor to reduce its weight, allowing the compressor to operate at higher energy efficiencies with better performance than ever before, while producing low sound levels both during start-up and while running.
Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump - 12000 BTU Features and Benefits:
- Inverter Driven Compressor - Maximizes energy savings by making sure only the energy needed to cool or heat an area perfectly is used. You can enjoy high-speed cooling and heating and consitent delivery of comfort year-round.
- Easy Installation - Installs quickly and easily, having no need for major construction and remodeling.
- Complete Zone Control - Realizes maximum control and energy efficiency by cooling and heating only those spaces in use.
- Easy and Convinient Controllers - Mitsubishi Electric offers a comprehensive remote controller that controls temperature, fan speed, and more. Choose from four modes: COOL, HEAT, AUTO, and DRY. The controller also has a 12-hour ON/OFF timer for one-button control of your personal comfort.
- Advanced Microprocesor Technology - Creates a comfortable environment no matter what conditions are outside with our advanced self-monitoring controls.
- Quiet Operation - You can hold a board meeting or teach a class in quiet comfort.
- Easy Maintain - With easily accessible filters, little or no ductwork to keep clean, and simple wiring between the indoor and outdoor units, Mitsubishi Heat Pump Systems require minimal maintenance, providing another level of comfort and convenience.
- Environmentally Friendly Refrigerant - Uses R410A, an environmentally friendly refrigerant.
Product Specifications
| MXZ2B20NA Outdoor Unit Performance: |
| Rated Cooling Capacity (BTU): |
20000 |
| Cooling Capacity Range (BTU): |
7,800 - 20,000 |
| Cooling Total Input (W): |
2,190 |
| Rated Heating Capacity (BTU): |
22,000 |
| Heating Capacity Range (BTU): |
8,500 - 25,500 |
| Heating Total Input (W): |
2,620 |
| MXZ2B20NA Outdoor Unit Power: |
| Power Supply: |
1-phase, 60Hz, 208 / 230V *2 |
| Voltage Indoor - Outdoor S1 - S2: |
AC 208 / 230V |
| Voltage Indoor - Outdoor S2 - S3: |
DC12-24V |
| MXZ2B20NA Outdoor Unit Specifications: |
| MCA (A): |
15 |
| MOCP (A): |
20 |
| Fan Motor (FLA): |
0.96 |
| MXZ2B20NA Outdoor Unit Specifications: |
| Compressor Type: |
DC Inverter-driven Twin Rotary |
| Compressor RLA: |
10.1 |
| Compressor LRA: |
15 |
| Airflow Cooling/Heating (CFM): |
1,485/1,640 |
| Refrigerant Control: |
Linear Expansion Valve |
| Defrost Method: |
Reverse Cycle |
| Cooling Sound Pressure (dB): |
49 |
| Heating Sound Pressure (dB): |
51 |
| External Finish Color: |
Munsell No. 3.0Y 7.8 / 1.1 |
| MXZ2B20NA Outdoor Unit Dimensions: |
| Width (Inches): |
33-1/16 |
| Depth (Inches): |
13 |
| Height (Inches): |
27-15/16 |
| Weight (lbs): |
130 |
| Number of Indoor Units: |
2 |
| MXZ2B20NA Refrigerant Specifications: |
| Refrigerant Type: |
R410A |
| Refrigerant Charge (Lbs, Oz): |
5, 15 |
| MXZ2B20NA Outdoor Unit Connections: |
| Gas Side O.D. (Inches): |
A,B: 3/8 |
| Liquid Side O.D. (Inches): |
1/4 |
| Max Height Difference (Feet): |
49 |
| Max Total Length (Feet): |
164 |
| MSZGE06NA Indoor Unit Performance: |
| Rated Cooling Capacity (BTU): |
6000 |
| Rated Heating Capacity (BTU): |
7,200 |
| MSZGE06NA Indoor Unit Power: |
| Power Supply: |
1-phase, 60Hz, 208 / 230V *2 |
| Voltage Indoor - Outdoor S1 - S2: |
AC 208 / 230V |
| Voltage Indoor - Outdoor S2 - S3: |
DC12-24V |
| MSZGE06NA Indoor Unit Specifications: |
| MCA (A): |
1.0 |
| Airflow at Cooling Lo-Med-Hi Dry (CFM): |
145-170-237-321-399 |
| Airflow at Cooling Lo-Med Wet (CFM): |
109-134-201-286-394 |
| Airflow at Heating Lo-Med-Hi (CFM): |
145-170-233-321-406 |
| Cooling Sound Pressure Lo-Med-Hi (dB): |
19-22-30-37-43 |
| Heating Sound Pressure Lo-Med-Hi (dB): |
19-22-30-37-43 |
| External Finish Color: |
Munsell No. 1.0Y 9.2 / 0.2 |
| MSZGE06NA Indoor Unit Dimensions: |
| Width (Inches): |
31-7/16 |
| Depth (Inches): |
9-1/8 |
| Height (Inches): |
11-5/8 |
| Weight (lbs): |
22 |
| Field Drainpipe Size O.D. (Inches): |
5/8 |
| Remote Control Type: |
Wireless |
| MSZGE06NA Indoor Unit Connections: |
| Gas Side O.D. (Inches): |
3/8 |
| Liquid Side O.D. (Inches): |
1/4 |
| Mitsubishi Warranty: |
| Compressor: |
7 Years |
| Parts: |
5 Years |
The Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump - 12000 BTU includes:
- Mitsubishi MXZ2B20NA - Outdoor Condenser
- Mitsubishi MSZGE06NA - Indoor Unit with wireless controller.
- Mitsubishi MSZGE06NA - Indoor Unit with wireless controller.
Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump - 12000 BTU Warranty:
- 5 year parts / 7 years compressor
To complete the Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump System consider to add the following accessories that are required to complete every mini split system installation:
- Line Set - efficiently double insulated tubing that transfers refrigerant between indoor and outdoor units.
- Drain Tubing - a tube that drains condensate from the indoor unit to the drain system or outside.
- Connecting Wire - provides power from an Outdoor unit to the indoor Units.
- Disconnect Box & Electrical Whip Kit - provides power for an Outdoor Unit.
- Diversitech E-Lite Condenser Plastic Pad (optional) - designed as a mounting base for an outdoor units.
- Wall Bracket (optional) - in case you need to mount an outdoor unit on the wall.
By adding the required accessories to the Mitsubishi MXZ2B20NA+MSZGE06NAx2 Mr. Slim Wall Mounted Dual Zone Mini Split Heat Pump System you are receiving a complete cooling/heating solution completely ready for installation, so your contractor does not need to purchase required Mitsubishi Accessories to finish the installation. Please note that indoor units receive power directly from an Outdoor Unit.