Specs

Intended Household:	3-4 Person
Fuel Type:	Natural Gas
Capacity (Gallons):	50
BTU Input:	40000
1st Hour Delivery (Gallons):	89
Vent Size:	3 x 4
Venting:	Atmospheric
Height (Inches):	59.625
Diameter (Inches):	20"
Weight (lbs):	145 lbs
Energy Factor:	0.58
Energy Star Rated:	No
Gas Connection:	1/2"
Water Connection:	3/4"
Recovery Efficiency:	79%
Warranty:	6-Year Limited Tank/ 6-Year Limited on Component Parts
Application:	Plumbing

FEATURES:

• Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter. A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity.
  • Enhanced Performance - Proprietary algorithms provide enhanced First Hour Delivery ratings and tighter temperature differentials.
  • Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels.
  • Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.
  • Pilot On Indication - Flashing green LED provides positive indication that pilot is on.
  • Separate Immersed Thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.
• Advanced ScreenLok® Technology Flame Arrestor Design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater.
• Resettable Thermal Switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow.
• Maintenance Free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions.
• Sight Window - Offers a view into the combustion chamber to observe the operation of the pilot and burner.
• Factory Installed Hydrojet® Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.
• Vitraglas® Lining - Bradford White tanks are lined with a exclusively engineered enamel formula that provides superior protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600ºF.
• 1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
• Pedestal Base.
• Water Connections -3/4" NPT factory installed true dielectric fittings.
• Factory Installed Heat Traps.
• Protective Magnesium Anode Rod.
• 3x4 "Snap Lock" Draft Diverter - Allows either 3" or 4" vent connections with inputs of 40,000 BTU/Hr or less. Over 40,000 BTU/Hr. has the 4" "Snap Lock" Draft Diverter.
• T&P Relief Valve - Included.
• Brass Drain Valve - Tamper proof design

  ----> Click the following for complete information on the product